Quick Downloads:

MS-200™

The MS-200™ panel is a fully crimped Standing Seam roof that is perfect for low slope roofs in any environment. The butyl injected seam prevents water from entering the system. Giving you a worry free roof for a lifetime. The system is a strong, durable, versatile, and perfect for long length roofs panels.

ICC-ESR #5046 with CBC-CRC Supplement

UL Evaluation Report UL ER25913-01

Features & Benefits

12″, 14″, 16″ and 18″ options available
24 and 22 Tru-Gauge™ and .032″ and .040″ Aluminum
Zinc Coil (inquire for thickness)
Floating clip system: allows for expansion/contraction of panels in longer lengths
2″ vertical rib, factory notching available
½:12 minimum pitch recommended (for lower pitches, please inquire)
On-site roll forming available for longer panels
Factory injected Butyl sealant available
Concealed fasteners: fasteners cannot leak
Weathertightness warranty available (Contact TMP representative for details)
MS-200™ FM Approvals Class: 4471
- FM Approvals Certificate
- FM Approvals Report
OverEZee retro-fit system available
Panel options: Striations, Accent Ribs, Flat Pan
Manufactured in Salem OR, Riverside CA & Sacramento CA

Material Specifications

26 gauge Kynar 500® Painted Steel .019″ (thickness prior to painting) G-90 Galvanized or Zincalume® AZ-50
24 gauge Kynar 500® Painted Steel .0236″ (thickness prior to painting) G-90 Galvanized or Zincalume® AZ-50
26, 24 & 22 gauge bare Zincalume® Plus AZ-55 (no finish warranty – 25 year perforation warranty)
22 gauge Kynar 500® Painted Steel .029″ (thickness prior to painting) G-90 Galvanized or Zincalume® AZ-50
.032″ Kynar 500® Painted Aluminum
16 and 20 ounce Copper (please inquire)
Kynar 500® and substrate testing data available (see website)
“Oil Canning” is an inherent characteristic of roof and wall products, and not a defect, which is not a cause for panel rejection

Testing

UL Construction No. 90, 176, 180, 238, 238A, 238B, 238C, 312, 335, 403, 435, 435 A, 437, 449, 451, 487, 506, 506A, 506B, 576, 577, 583, 608 & 610
UL 580 Class 90 – Wind Uplift
UL 790 Class A (ASTM E108) – Fire rated
UL 2218 Class 4 – Impact (hail) rated
FM Class 4471 – 1-75/120 wind uplift, Class A fire spread, severe hail & foot traffic
ASTM E1680 – Air Infiltration (roof)
ASTM E1646 – Water Infiltration (roof)
ASTM E1592 – Structural uniform static air pressure
ASTM E331 – Water Infiltration (wall)
ASTM E283- Air Infiltration (wall)
ASTM A653/A924 – G90 Galvanized
ASTM A792 – Zincalume/Galvalume AZ-50/55
ASTM B209 – Aluminum Substrate
ASTM E2140 – Standard Test Method for Water Penetration (full immersion)
ASTM E1514 – Standard for Structural Standing steel roof panels systems

Finishes

21 Standard Colors, 5 Metallic Colors and 4 Specialized Colors
Vintage® has a color range that can vary from batch-to-batch and have directional variations
- For more information: click here
Rusteel Plus™ has no metallic coating, is unpainted and has no warranty
- For more information: click here
Kynar 500® Paint System-the ultimate in exterior durability and color retention
“Cool” color pigments are specially designed to reflect infrared light, reducing heat gain to dwelling, and conform with ENERGY STAR® criteria
Superior quality, two-coat, 70% resin finish, applied at a 1 mil. thickness
40-year residential paint warranty
20 and 30 year commercial paint warranty: Contact TMP for warranty specifications

DI SEAMER RENTAL: click here

DI SEAMER Standard Rental Guidelines: click here

• 180 degree seams are not considered an architectural detail. The detail improves the weather tightness and wind uplift capabilities of the panel system, but will show stress and waviness in the seam. The detail is recommended for slopes less than 3/12, roof areas not easily viewed from the ground, and for high wind areas. For additional information, contact a TMP representative and DI Seamers for support and information about the proper use of seaming tools.

Request More Information